I just finished replacing my steering column. I need to replace the plastic peices that go around the column, but I need to know how to take the black part of the switch off to do so.

http://i42.photobucket.com/albums/e303/declinepress/MarkVIII/80.jpg

http://i42.photobucket.com/albums/e303/declinepress/MarkVIII/70.jpg

Bump!

at the bottom of the switch housing is a small hole,you need to insert a coat hanger size screw driver or something else in there of that size to release the ignition switch,it will then pull out the whole ign cylinder.

at the bottom of the switch housing is a small hole,you need to insert a coat hanger size screw driver or something else in there of that size to release the ignition switch,it will then pull out the whole ign cylinder.

Worked out thanks.