http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=3330

anyone that knows anything about this, please chime in.

ok, ya see the tube that runs from the rear of the intake, that connects to the Throttle Body?

It may be a stupid question, but the intake looks about the same as the stock gen 1. I was thinking if i could get a hold of that tube, i could relocate the throttle body, and perhaps increase performance, but if nothing else, it could allow me to use some of the mustang Cold air intakes (with a little less modification than normal)

It's a 2 valve setup.

This is what you need.....:D


http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=3816

prolly wont fit under the hood of a gen 1, and for that price, you could slap gears, JMOD, and spray your way to low 12's.

For that price you could do ALOT more than that. :D.



With proper sourcing of the parts, and doing the work yourself mind you.


mike

This is what you need.....:D


http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=3816


LMFAO! are you serious! Is that how much you spent on the cobra intake you have, or is that just a cobra motor? hell i could almost buy the whole motor for that much.

other than the fact that doesnt fit out heads.. despite the page heading..
thats the FR500 intake, its for C heads..

other than the fact that doesnt fit out heads.. despite the page heading..
thats the FR500 intake, its for C heads..
:) I know this.



But I do have a set of C-heads you could use if you wanted it Mr Wilson. :D

its supposed to be a good intake, but people have been having good luck with the aviator intake and mating a cobra/mach intake hat to it.. same basic intake, thousands cheaper