Lincoln vs Cadillac Forums Do it yourself car repair

Thank you for visiting Lincoln vs Cadillac Forums

You have reached our archive. Click Here to visit our main website.


water in coil wtf?>??

2k2ls
November 2nd, 2005, 12:51 AM
well a few months ago i put up some pics of a pretty oil-soaked coil. well today i decided to go for the infamous valve cover job. everthing sucks so far but heres my thing. My number 8 cyl was full of water....why is this. this sux

2001LS8Sport
November 2nd, 2005, 06:53 AM
I used a pressure washer to clean my son's engine. It filled the coil wells with water too. Evidently, those covers don't seal worth a crap. Did you wash the engine lately?

beaups
November 2nd, 2005, 09:55 AM
you may not have torqued everything down properly (covers) when you replaced the coil last time??

2k2ls
November 3rd, 2005, 01:54 PM
well i havent cleaned the engine recently. and the coil i checked was on the other head. thats whats bugging me out...

TorontoLS
November 5th, 2005, 01:32 AM
Just spent $900.00 to repair my 2000 LS-8 because my detailer used high pressure washer under my engine and water got in ignition coils. Dealer told me that silicone seals were dry and this is why water seeped in. Dealer re-sealed with silicone, advised me not to take car for carwash especially high pressure underspray for 2 weeks to let seals dry. Of course, warranty has expired Seems like I am not the only one...

SoonerLS
November 5th, 2005, 09:16 PM
Just spent $900.00 to repair my 2000 LS-8 because my detailer used high pressure washer under my engine and water got in ignition coils. Dealer told me that silicone seals were dry and this is why water seeped in. Dealer re-sealed with silicone, advised me not to take car for carwash especially high pressure underspray for 2 weeks to let seals dry. Of course, warranty has expired Seems like I am not the only one...
"Silicone seals were dry?" WTF!?!?
That's a load of horse crap. Silicone doesn't "dry out," and it doesn't react to oil. That's why they're using it in oil filters and in newer gaskets (including head gaskets). Its heat resistance is also why they're making cookware out of it--I just saw some all-silicone cornbread molds at Wal-Mart last night, and I got my mother some silicone spatulas/scrapers several years ago, which are still in pristine condition (and rated to over 500* F).

It's bad enough that he fed you that line of BS, but I can't believe the dealer had the stones to make you pay for his mistake. I'd go back, and if I didn't get satisfaction from him, I'd send my lawyer. Even in Canadian dollars, that's ludicrous.

Government Auctions:Credit Card:Personal Loan:Buy Anything On eBay:Remortgages

EZ Archive Ads Plugin for vBulletin Copyright 2006 Computer Help Forum