Lincoln vs Cadillac Forums

(This is the forums archive - If you want to get back to the main site simply click the banner above and you will be taken to our homepage.)

Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it back to our main site - Lincoln vs Cadillac Forums

Cadillac XLR : Cadillac CTS : Cadillac : 2005 Cadillac STS : Cadillac Forums : 2000 Lincoln LS : Lincoln Mark VIII : Lincoln Mark VII : Car Wax
Lincoln Town Car : Lincoln Air Suspension : Lincoln Continental : Lemon Law : Do It Yourself Car Repair : Lincoln vs Cadillac Forums : Mesothelioma

Back to the Archive Main Page

Pages: 1

Post your Engine Bay Pictures

(Click here to view the original thread with full colors/images)

Posted by: MarkOfDeath

Im getting bored with some of these threads so im starting a new one
I changed the intake a couple times.

Posted by: Markviiiedrea

just the same old boring one.

Posted by: MarkOfDeath

how hard was it to get rid of the lower air resonator, the one you have to cut off.

Posted by: Markviiiedrea

a saws all, fiberglass kit and a can of black paint, about 3 - 4 hours with dry time

Posted by: Dereck

Hi All

Regards

Dereck

Posted by: squirell

All LMS

Posted by: 94m5

This is my 94

http://community.webshots.com/photo/...90846360JHZoAP

Here is the 95, which is in pieces right now, all of the parts are at the powdercoaters.

http://community.webshots.com/photo/...90854343SLIdds

http://community.webshots.com/photo/...90854591oGzpwM

http://community.webshots.com/photo/...90854856YselKF

Posted by: ONEBADMK8

The "TerminVIIIor"

The "SuperMark"

Posted by: BlackIceLSC

Contest winner!

My 94's motor...dirty, and messy...but wait until I clean it up!

BTW, I see the N2O bottle picture in a post above....unless your motor is in the trunk...TRUNK SHOTS dont count!!!

Posted by: squirell

BTW, I see the N2O bottle picture in a post above....unless your motor is in the trunk...TRUNK SHOTS dont count!!!

That's 125 hp in that trunk
about 40% of whats under the hood LOL.

Posted by: unstoppable

"Just the same old boring one"
"ALL LMS"
"Contest winner"

Posted by: seanklsc

Courtesy of Old School, couldn't find any other pics

Posted by: ONEBADMK8

seanklsc I noticed that your ICEBOX installation was wrong. You have to remove the clamp from the K&N and put it on the inboard side (Firewall), this way it pushes the ICEBOX tighter to the front.

Posted by: MonsterMark

Quote:

Originally Posted by ONEBADMK8

seanklsc I noticed that your ICEBOX installation was wrong. You have to remove the clamp from the K&N and put it on the inboard side (Firewall), this way it pushes the ICEBOX tighter to the front.

Ah, Geno. Ever that keen eye for squeezing that extra ounce of performance out of every ride.

Posted by: seanklsc

Thanks Geno, I'll fix that

Posted by: squirell

Chris,
Who's motor did you post ?
It is freaking awesome Bro !!!!
Matt

Posted by: unstoppable

I just went out in my garage one day and found it there. LOL

Posted by: driller

Same ole, same ole...

Need some new pics... but it needs to warmup some so I can get some work done.

Posted by: ONEBADMK8

JP, you too. Move the clamp on the outside of the ICEBOX. It makes it fit much tighter and better. Same ol' same ol' or not it still looks SLAMIN'!

Posted by: squirell

Quote:

Originally Posted by unstoppable

I just went out in my garage one day and found it there. LOL

I wish that would happen to me one day ! LOL

Posted by: Joeychgo

Quote:

Originally Posted by driller

Same ole, same ole...

Need some new pics... but it needs to warmup some so I can get some work done.

Looking good as always JP

Posted by: StraDog

Yea, I need to throw some money into the engine this spring.

Chicago finally has some decent weather coming this week. Almost 70 on Wednesday ! WOOO.

I have a quick question. Doe anyone have an extra rubber adapter thingy that goes onto the maf unit from the thottle body tube. I also need to know how to make it fit onto the MAF sensor unit without cutting it and making it work. the diameter of the rubber adapter was too large for the stock maf unit, anyone know how to fit it correctly. I think I need a o ring adapter that goes on the maf unit to make it fit tight.

Any suggestions ?

Posted by: ONEBADMK8

Quote:

Originally Posted by StraDog

Yea, I need to throw some money into the engine this spring.

Chicago finally has some decent weather coming this week. Almost 70 on Wednesday ! WOOO.

I have a quick question. Doe anyone have an extra rubber adapter thingy that goes onto the maf unit from the thottle body tube. I also need to know how to make it fit onto the MAF sensor unit without cutting it and making it work. the diameter of the rubber adapter was too large for the stock maf unit, anyone know how to fit it correctly. I think I need a o ring adapter that goes on the maf unit to make it fit tight.

Any suggestions ?

What mass air are you dealing with that you need the o ring for?

Posted by: StraDog

Just the stock MAF unit. When I tried to put the rubber adapter from the throttle body tube to the stock MAF, it was too large and wouldn't hold in place. Maybe I was dumb, but I think a rubber adapter needs to go on the MAF first, much like a O-Ring, then have the throttle body tube rubber connector go onto the O-ring adapter so it tightens up firm and completely sealed.

I know this is very confusing, but I don't know which other way to put it.

Posted by: driller

Quote:

Originally Posted by ONEBADMK8

JP, you too. Move the clamp on the outside of the ICEBOX. It makes it fit much tighter and better.

Yeah, I took care of that last time I was chastised!

Got a whole new MAF setup now and need to take new pics. Plans are in the works for even more show AND go!

Here's a teaser...

Posted by: gadget73

I should have grabbed pics of my nice new HO covered in fire extinguisher powder. She's no Mark 8, but I'll bet none of y'all have black split loom with white highlights.

Posted by: StraDog

Quote:

Originally Posted by driller

Yeah, I took care of that last time I was chastised!

Got a whole new MAF setup now and need to take new pics. Plans are in the works for even more show AND go!

Here's a teaser...

JP. Is that ported as well? Let me know how it goes, I'm in the field for some intake work. I would love to get my hands on a ported/polished cobra manifold.

Posted by: StraDog

WoW, Squirrel, that engine is beautiful.... It's maticulous. The intake tube is astonishing, LOL. Great job LMS.

Can I volunteer myself to a LMS makeover ?....

We can have a contest for worst looking engine bay's, and have LMS give a full engine makeover. Although, This can only be exclusive to Gold Members. I better become one soon.

Great idea !

Haha. jk. I wish Geno could have a full day with my car. Let him do his magic. That's my dream.

Posted by: driller

Quote:

Originally Posted by StraDog

JP. Is that ported as well? Let me know how it goes, I'm in the field for some intake work. I would love to get my hands on a ported/polished cobra manifold.

Stay tuned...

Posted by: unstoppable

Ha!

Posted by: StraDog

LoL, very nice. Can't wait to see the finished product.

I think I'm going to have to call Chris up soon. LOL

Posted by: driller

Quote:

Originally Posted by unstoppable

Ha!

Shhhhhhhhhhhhh...

Posted by: ModPWR

Quote:

Originally Posted by driller

Shhhhhhhhhhhhh...

poor Steve .... LOL

but all is well what ends well ...

Posted by: unstoppable

Quote:

Originally Posted by driller

Stay tuned...

The one in this picture is not Steves.It's Version 2.0 !!

Posted by: StraDog

I WANT INTAKE !!!