Lincoln vs Cadillac Forums

(This is the forums archive - If you want to get back to the main site simply click the banner above and you will be taken to our homepage.)

Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it back to our main site - Lincoln vs Cadillac Forums

Cadillac XLR : Cadillac CTS : Cadillac : 2005 Cadillac STS : Cadillac Forums : 2000 Lincoln LS : Lincoln Mark VIII : Lincoln Mark VII : Car Wax
Lincoln Town Car : Lincoln Air Suspension : Lincoln Continental : Lemon Law : Do It Yourself Car Repair : Lincoln vs Cadillac Forums : Mesothelioma

Back to the Archive Main Page

Pages: 1

Staggered diameters

(Click here to view the original thread with full colors/images)

Posted by: YouthKwest

Has anyone staggered their wheels before?

I have a 98 Mark VIII LSC that I would like to put 20's on the rear and 18's up front. I like the staggered look on resto-mods and thought this might be a sweet addition to my car. Along with the Twin Turbo setup that i am working on with a friend of mine. ( discussion on that later )

--Joe

Posted by: YouthKwest

Quote:

Originally Posted by YouthKwest

Has anyone staggered their wheels before?

I have a 98 Mark VIII LSC that I would like to put 20's on the rear and 18's up front. I like the staggered look on resto-mods and thought this might be a sweet addition to my car. Along with the Twin Turbo setup that i am working on with a friend of mine. ( discussion on that later )

--Joe

Anybody?

Posted by: blue_t

i have staggered the wheels on my 97,19 fronts and 20 rears.

Posted by: NYC LS8

That's probably one of the only Mark VIIIs that I think is to die for. Damn that car is bad ass.

Posted by: Icarus

I agree NYC

Youth, If you want a staggered setup, your most likely going to be getting custom wheels, or choosing ones from a very, very few choices of companies that offer them in our bolt pattern with different sizes available.
There is a decent selection in our bolt pattern, but not in staggered sizes, or even staggered widths for that matter...
Doing a hub swap to the Mustang pattern might open the possibilities up some, but you need to figure out the brakes etc too (if your going to convert them or redrill rotors, etc...)