Lincoln vs Cadillac Forums

(This is the forums archive - If you want to get back to the main site simply click the banner above and you will be taken to our homepage.)

Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it back to our main site - Lincoln vs Cadillac Forums

Cadillac XLR : Cadillac CTS : Cadillac : 2005 Cadillac STS : Cadillac Forums : 2000 Lincoln LS : Lincoln Mark VIII : Lincoln Mark VII : Car Wax
Lincoln Town Car : Lincoln Air Suspension : Lincoln Continental : Lemon Law : Do It Yourself Car Repair : Lincoln vs Cadillac Forums : Mesothelioma

Back to the Archive Main Page

Pages: 1

Pullies ? part II

(Click here to view the original thread with full colors/images)

Posted by: topher5150

will the underdrive pullies for the cobra (96-00) fit the lincoln mark viii (98)

Posted by: MarkVIII93

Try sticking with 96-98. Im pretty sure that is what they're listed as on most sites. Any pullies that work on 96-98 cobras WILL work on our cars. I have a march crank underdrive on mine. Waterpumps are the same and so are alternators. That's the extent of any street application underdrive set sold for cobras. So you should be good.

Posted by: ONEBADMK8

Just do the crank pulley/balancer from ASP.

Posted by: topher5150

what about the thing infront of the crank pully, or can i slide the pully off without removing it.

Posted by: MarkVIII93

Quote:

Originally Posted by topher5150

what about the thing infront of the crank pully, or can i slide the pully off without removing it.

i think its bolted to the timing cover. just unbolt it....and move it to the side... simple as pie

Posted by: topher5150

mmmmmmmmm pieee

Posted by: MarkVIII93

For the crank you may also need a longer bolt to pull it into the crank because when I did mine the stock bolt was too short so I pulled it in with the long one and re-installed the stock one. Make sure you get a bolt with the exact threads. Big washer on the long bolt too if necessary.

Posted by: chickenviii

"as for just move it to the side" uh, no thats the fresh air injection system (pumps fresh air into the cats upon startup) it has metal tubes bolted to it and prob rusted solid! get yourself a can of PB blaster and soak that thing a few times a day for a few days, and it might come apart. good luck

Posted by: topher5150

will the pump thing be in the way after installation of the crank pulley

Teen Chat:Mobile Phone:Debt Help:Mortgage Calculator:Credit Cards