(This is the forums archive - If you want to get back to the main site simply
click the banner above and you will be taken to our homepage.)
Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it
back to our main site - Lincoln vs Cadillac Forums
All parts are for a 98 LSC
I am going to need the full kit to get 4.10's and traclok into the mark viii
inluding,
8.8 traclok 28 spline IRS
4.10 Ring and pinion
Speedo Gear(whichever one it is for 4.10)
Rebuild kit(bearings and gaskets.)
also need a drivers side mirror GLASS ONLY. if thats possible.
Also an a/c vent (saddle/tan in color) it is the passenger side all the way over and is the lighter tan of the 2 tone tan interior.
Thank You hope you can help me here!
Posted by: mrzeee
Hi
Thank you for the request. I have the ford racing parts in stock. The mirror and register vents are not available and the speedo gear is really not close for the 410's
what ratio do i have to get to get a speedo gear that will be close? 4.30? i dont want to go any lower than 4.10.... i am just going off the SuperCoupePerformance.com site. they say this is the one.. correct me if im wrong which i probably am.. 23 tooth gear????
Thank you very much.. if ordered, how long will it take to ship to chicago?
also how much is shipping?
Posted by: mrzeee
please note...."Be aware that as you cluster more teeth together on the gear, the teeth become thinner resulting in shorter gear life. It is not uncommon for these gears to only last 5000 to 10000 miles, so you may want to buy two or more."
So that gear is available for about the same price but the disclaimer above applies.
Posted by: 98CobraStarLSC
If i get a programmer such as the sct x3, it has where you can enter the rear end ratio for calibration? is this the best way to go?
What is your paypal or do i have to give you a credit card over the phone?
Thanks i am ready to order.
Also, if its not too much trouble, how much is the ford racing setup just like this with t-lock for a 7.5" rear end? 3.73 R&P bearings and the whole nine yards.. Thanks again sir!
Posted by: mrzeee
The trac loc for 7.5 is 192.00 There are no 373's for the 7.5...sorry. We do not do paypal. credit cards checks and cash.
If you give my your phone number we can do the deal over the phone. I will need your complete shipping and billing info and phone to get the order going.
Thank You
Max Zuckerberg
Parts Specialist
Five Star Ford
7100 east Mc Dowell Road
Scottsdale AZ 85257
Direct 1-800-866-1520 ext 236
Fax 1-480-949-8478 parts@fivestarford.com
Posted by: 98CobraStarLSC
Pm Sent!
Posted by: 98CobraStarLSC
The seal /bearing kit comes with shims right????
Please call me today and ill get you all my info.. the phone number and address is in your pm box...
Thanks Max!
Posted by: mrzeee
Hi 98
Thank you for the order. Yes the shims are in the brg kit. You parts are being packed to ship today.
Max
Posted by: Icarus
Edit: nvm, I didn't read it was a 2nd gen, sorry
Posted by: 98CobraStarLSC
Everything showed up today Max.
Thank You for all your help. it was packaged very well and got here quickly.. You truly are the man.. I really appreciate everything and i will spread the word of your help..
I will be getting ahold of you for all my future ford racing parts.
Thank You Sir!!
Posted by: mrzeee
Thank you for the kind words. I am happy it all arrived in good order in time for the weekend.
