(This is the forums archive - If you want to get back to the main site simply
click the banner above and you will be taken to our homepage.)
Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it
back to our main site - Lincoln vs Cadillac Forums
I can do some tuning on Northstar PCM's
I am working on a new project that uses a LS1 PCM on a Northstar.
This is a GM setup that I will be using. It is 100% safe, but it may take some work in a production car. The Corvette had most of the same module so it can be worked out. Currently this is a 96 to 99 program, But I see not problem running it on a 00 to 03 car. This is a RWD program, but again I looked it over and it looks to be FWD friendly.
Current projects or finished programs are as follows
93 to 95 I am just in the start up phase
96 to 99 Deville's, Eldo's, and 96, 97 Seville's I have done two, but I need more time.
98 & 99 Seville's I have done a lot of work on this program.
96 to 99 Northstar with LS1 Just in start up
00 to 03 all Northstar's I have this well covered
The 98 and 99 Seville program
I have cranked up the speedlimiter, increased the torque management up to 99%, increased the torque out put on low RPM's,
The 00 to 03 Northstar
I have done some major tuning
Speedlimiter moved to 155mph, Moved the shift point just a little higher, corrected some shifting problems, knocked a second or more off in the quarter mile. I have a little more on the stage one program to do and then I will move into the second phase.
Posted by: NorthstarAJ
The factory speacial project LS1 PCM running a Northstar is almost done.
