(This is the forums archive - If you want to get back to the main site simply
click the banner above and you will be taken to our homepage.)
Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it
back to our main site - Lincoln vs Cadillac Forums
I was wondering if someone might possibly know locations / colors for the following 2 wires:
speed signal wire
reverse light wire (preferably up front so i don't need to run all the way to the rear)
I figured someone might know who has installed a nav system before. I'm switching over to the Pioneer AVIC-N2 and need to hook these up.
Thanks in advance guys!
Posted by: Jibit
do a search (where is Frogman when you need him!)
its been coverd somewhere, or you can wait for me to go home and look it up on my CD. I'm sure someone around here has it handy though.
Posted by: Mark 8 U
It's actually the Pioneer AVIC-Z2, not the N2, just FYI - I mis-spoke on that. I have searched for "speed sensor wire" and "reverse wire" but couldn't seem to locate anything under those, but perhaps I'm just missing something.
Posted by: Jibit
Quote:
Originally Posted by Mark 8 U
It's actually the Pioneer AVIC-Z2, not the N2,
doesn't matter,they both use the same wires from the car
Posted by: Mark 8 U
Yes, they would ... I was more posting that so if someone looked up this particular head unit they would find information in the archives, because I plan on posting how I am able to get the park brake defeat to work as soon as I get the hard drive back into the unit.
Posted by: Icarus
The PCM in the left hand IP has an input from the speed sensor (pin 58 GY/BK)
Reverse signal goes up to the rearview mirror, so if you follow the BK/PK wire from that down the DS pillar or the DS headliner area (I'm not sure which way the wire runs, so you'll have to follow from mirror) you should find a place to connect here somewhere...
Posted by: Mark 8 U
Thanks for your help! I pulled the harness out of the rearview mirror and traced it back up into the headliner, but unfortunately, every single wire in that harness is solid black. I presume Ford did this so that it would be less visible from outside the windshield. I pulled the driver's side pillar trim but it doesn't appear to run up through that way. Another other ideas on where to pick up a location on this? Perhaps the PCM has a signal?
Posted by: Icarus
Pin 5 (it says BK/PK in EVTM, and BK in the harness pinout, go figure ) It will read 12V when in Reverse.
Posted by: Icarus
You could aslo maybe try under the shifter and see if there is a Y/LB wire (lights the R indicator.)
Posted by: chickenviii
it was my understanding that you dont even need to hook these wires up, or am i wrong (it happens from time to time)