
|
Originally Posted by OldSchool1
I don't like them ....
because they should be on my car! You hooked that up nicely. Normally, I don't like after market wheels on a Mark VII but you pulled it off with flare. WTG |
|
Originally Posted by 460 Tzilla
THANKS OLDSCHOOL1, I'VE BEEN ON THIS WEBSITE FOR AWILE JUST NEVER POSTED HERE BEFORE..THERE ARE DEF. SOME NICE CARS ON HERE INCLUDING THE ONES YOU'VE OWN(ED)..
![]() |
|
Originally Posted by Lincolngirl91
I LOVE your rims and LOVE your mark
|
|
Originally Posted by OldSchool1
You're welcome.
Hi. I like your avatar! Is Wilmy short for Wilmington, Delaware? I like rims. Rims rock. |

|
Originally Posted by Frogman
Nice wheels, but I have to ask....
Why is there a wheel chock behind the passenger front tire? ![]() |

|
Originally Posted by Frogman
PARKING BRAKE. 'nuff said.
|
|
Originally Posted by eightlives
that wheel chock is made for a semi-truck. LOL
I know I have two of them I umm found them ![]() |

|
How did you get them to fit? I always see them with no center caps with the dust cap on the rotor sticking out.
|
|
My Bullets Are Aftermarket And They Fit The Front Hubs,but I Did Use One (1/2 Inch Center)washer On Each Stud .. My Buddy's Mark Has 18 Inch Fr 500's But He Has Sn95 Hubs.. Pic Enclosed
|
|
I thought about using sn95 hubs but what do you do about all the abs stuff
|
|
...
but seeing how its your fault I'm keeping mine, you owe me some answers. ![]() |
|
I was set to go for a 98 Mark VIII. I didn't see the beauty in my car until I saw that pic. dude, you saved me about $6500. Heck I'll probably take the money and do mine up. A few of questions if you'll humor me. What is the rear and front ride height set at? Did you paint the bumpers black, or did it come that way? Was the car always black, and if not, did it look like every other Mark VII out there before the work? Hate to say it, but seeing how its your fault I'm keeping mine, you owe me some answers.
![]() |
|
My in-expertise with threads is showing. I refer to the b.e.a.u.tiful Black Mark VII with the new aftermarket bullit rims. Okay, so there's a couple. It was the Mark with the mustang sitting in the garage in front of it. the one posted "Pics of my new rims." I was just curious if it looked like every other Mark before that, cause it sure don't now.
![]() |
|
I was set to go for a 98 Mark VIII. I didn't see the beauty in my car until I saw that pic. dude, you saved me about $6500. Heck I'll probably take the money and do mine up. A few of questions if you'll humor me. What is the rear and front ride height set at? Did you paint the bumpers black, or did it come that way? Was the car always black, and if not, did it look like every other Mark VII out there before the work? Hate to say it, but seeing how its your fault I'm keeping mine, you owe me some answers.
![]() |
the car is modified with 5 speed and built 302
|
P.S. I was also thinking the back of your SE was at different trim heights in the different pics. Turns out that was probably right huh.
P.S.S. Actually, from the time I posted the questions and you didn't respond I thought I might have offended you with that little crack about owing me answers. Its true though. I had the 98 picked out, and I was within 24 hours of going down there. Seeing the pics of all these beautiful Lincs made me stop and think. My last car was a BMW 328i. I like the Mark better. I really do. I cannot believe how tight and quiet that car still is 21 years later. |
Or now I guess they have the "gun metal" color...


|
gee, guess i shoulda scrolled to the second page! lol! howzit goin? Jeff tell ya about the transport company fiasco?
On another note, anyone doing the FR500'S. The ones that were on this car when i bought it were 18x9's. Tires were too small, previous owner said he made the mistake of lbeing talked into this size tires. Anyways, wheels fit fine up front with SN95 spindles. there was a 3/16" wheel spacer behind each rear wheel. since the sn95 spindles seem to put the wheel a little further out, i reused the spacer on the rear when i put the 17x8 bullitts on it. I REALLY liked the 18" FR500'S but the tires were toast (knew this when i bought it), couldnt find used ones in town ANYWHERE in the sizes i wanted, didnt have the cash for new ones and couldnt see spending $400 on ebay for used tires either. I bought the 17" bullitts with NEW tires on them and sold the FR500's and came out even up. May go with some 17" fr500's come tax return time but we'll see. the bullitts look good, i swapped center caps with the fr500's and all is good. woukld have loved to have beenm able to afford to buy both cars (my white one AND this black one) but couldnt swing it. Mike |
vBulletin Copyright ©2000 - 2008,
Jelsoft Enterprises Limited.
vB Easy Archive Final ©2000 - 2008
- Created by Stefan "Xenon" Kaeser