Lincoln vs Cadillac Forums

(This is the forums archive - If you want to get back to the main site simply click the banner above and you will be taken to our homepage.)

Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it back to our main site - Lincoln vs Cadillac Forums

Cadillac XLR : Cadillac CTS : Cadillac : 2005 Cadillac STS : Cadillac Forums : 2000 Lincoln LS : Lincoln Mark VIII : Lincoln Mark VII : Car Wax
Lincoln Town Car : Lincoln Air Suspension : Lincoln Continental : Lemon Law : Do It Yourself Car Repair : Lincoln vs Cadillac Forums : Mesothelioma

Back to the Archive Main Page

Pages: 1

Mark VII parts

(Click here to view the original thread with full colors/images)

Posted by: Black87LSC

Hey guys, i got 2 mark vii's if anybody needs any parts. One is a Black '89 LSC (complete car) with maroon interior. This is a VERY solid car. The other one is a Light Titanium (Silver) '88 with gray interior. This car is complete minus the motor and transmission. Neither car has ever been hit. I will be keeping some parts, but most of the parts I will be selling. If anybody needs anything or has any questions, let me know.

Posted by: Black87LSC

The cars have to go within a couple of weeks, and i'm stripping out anything that anyone needs! Anybody that needs ANYTHING, let me know. I'd rather see people use the parts than see them get hauled to the crusher.

Posted by: JoshMcMadMac

I might be interested in some of the interior of the 88. What condition is everything in?

Posted by: Black87LSC

Everything is in decent shape except for one of the front seats (can't remember which one is worn). Other than that it's relatively decent. Let me know what you need and I can send you some pictures.

Posted by: OldSchool1

Quote:

Originally Posted by Black87LSC

The cars have to go within a couple of weeks, and i'm stripping out anything that anyone needs! Anybody that needs ANYTHING, let me know. I'd rather see people use the parts than see them get hauled to the crusher.

Yo.
Did you post this at FvC also? There's a few Mass Mark VII owners there also.

Posted by: Black87LSC

Quote:

Originally Posted by OldSchool1

Yo.
Did you post this at FvC also? There's a few Mass Mark VII owners there also.

I didn't, but thanks for the idea.

Posted by: JoshMcMadMac

I am looking for good door panels. Unfortunately, it is damn near impossible to get good black door panels for a decent price. So now I am thinking of running two-tone on the interior, so I can get good door panels and not miss-match. I hope that makes sense. I guess I would want the two door panels, the glove box door, maybe the carpet, maybe the center console, or parts of it, the plastic parts that are on the side of the seats, and possibly the seatbelts. How's that sound? Let me know.

Posted by: Black87LSC

OK, I'll check the car tomorrow since it's dark right now. I think all of that stuff is good. Depending on the weather, I might be able to take pictures.

Posted by: Sifrino3

Can you get me the front header shipped for a total of $100. Everything that hooks to it also. Xcept for fenders/main parts. . .

Posted by: Black87LSC

I can get you other front end pieces, but getting the header panel/support shipped would be too much. This for your OVERCAST car??

Posted by: Sifrino3

Yes, looking to get the tranny rebuilt in a month if not sooner.

Posted by: Black87LSC

Send me a detailed list of what you need. I have some parts that you might need (corner filler panel, lights, etc.) I don't have a grill, but it looks like yours is intact.

Posted by: Sifrino3

Drivers fender plus all trim. Front header with just driver head light and far turn signal. Chrome bumber and all under trim. That is everything.

Except I do need the drivers door. It is all dented in. But I will not pay for shipping of that. I could just dream of how much that would cost. . .

Posted by: Black87LSC

I'll make a list of front end trim etc. that I have that is good and let you know. The silver car has a nice straight fender.. I talked to my dad and he said UPS shipping for the fender would probably be around $40-$50, and I'd like to get $50 for the fender with all the trim.

Posted by: Sifrino3

I don't need the stuff under the fender. That keeps the dirt out. That should be some weight saving. I dunno what I will spend or what I can at this point. Just having the rebuild in the back of my mind. If everything is rust free. Has all bolts and everything I would need. I would love to do one pop for shipping. I was talking to a guy and he said it would be around $50 just to send the front header from Florida. Thats with everything that is bolted to the front header and includes the "Ornament. . ."

Posted by: Black87LSC

Quote:

Originally Posted by JoshMcMadMac

I am looking for good door panels. Unfortunately, it is damn near impossible to get good black door panels for a decent price. So now I am thinking of running two-tone on the interior, so I can get good door panels and not miss-match. I hope that makes sense. I guess I would want the two door panels, the glove box door, maybe the carpet, maybe the center console, or parts of it, the plastic parts that are on the side of the seats, and possibly the seatbelts. How's that sound? Let me know.

I have all of those parts. Let me know exactly what you want and make me an offer and I'll take them out for you.

Posted by: JoshMcMadMac

Quote:

Originally Posted by Black87LSC

I have all of those parts. Let me know exactly what you want and make me an offer and I'll take them out for you.

What would shipping run for all of that? And what condition is everything in? Especially the door panels...are they faded, cracked, warped, hanging on the door funny; is it still pinned to the door like it should be?

Posted by: Sifrino3

Okay I want the front header and everything on it. Plus the little trim peices the screw in under the head lights that wrap around the bumper. But just the drivers side. Ill give you $100. Including shipping. . .

Drivers fender also. . . If we can get a real good deal. But all I really want is the header peice. . .

Posted by: Sifrino3

E-mail me, I can do a money order.

Posted by: Black87LSC

Quote:

Originally Posted by JoshMcMadMac

Josh, pm me your email address and i'll get back to you this weekend with some pictures. Everything that you want is in decent shape.

Posted by: LSC SS

Couple hints for shipping large items. FEDEX ground is almost half the price of UPS and they do not have the $5 charge that UPS does for shipping an item with no box. I regularly ship fenders and header panels wrapped only in large bubble wrap. You will have to "cheat" the dimensions by an inch or two cause they end up being real close to the limits !!
Doors can be shipping via Greyhound Bus Lines Freight Service

Posted by: surfaaron

I need the lincoln emblem that is on the trunk(right corner). I think it is the same for my 87 LSC?

Posted by: Black87LSC

Quote:

Originally Posted by surfaaron

I need the lincoln emblem that is on the trunk(right corner). I think it is the same for my 87 LSC?

Thanks SS. Neither one of the cars have emblems on them, (They all fall off!), but I think I have a stash of them somewhere..... I'll let you know

Posted by: JoshMcMadMac

Quote:

Originally Posted by Black87LSC

Josh, pm me your email address and i'll get back to you this weekend with some pictures. Everything that you want is in decent shape.

Done.

Posted by: re-Markable LSC

How are the Maroon seats?

Posted by: xclr8menow

I might be interested in the rear brakes. I have converted my Mustang to 5 lug and would also like to change from drum to disc. I would nead nearly everything for the brakes; from the brackets, rotors, lines, well, anything else you might think might be needed for a complete conversion. Let me know..

Thanks
Scot

Posted by: Black87LSC

Quote:

Originally Posted by re-Markable LSC

How are the Maroon seats?

They are in relatively good shape, a little worn but decent.

Posted by: Black87LSC

Guys I took a bunch of pictures of the cars, pm me with your email addresses if you need anything. The gray dash in the Silver car has no cracks at all!

Posted by: Black87LSC

Quote:

Originally Posted by xclr8menow

I might be interested in the rear brakes. I have converted my Mustang to 5 lug and would also like to change from drum to disc. I would nead nearly everything for the brakes; from the brackets, rotors, lines, well, anything else you might think might be needed for a complete conversion. Let me know..

Thanks
Scot

I'd like to help you with that, but my father needs the brakes for his LSC (his brakes are REAL bad), and I think I'm keeping the other rear-end for a build up for my car, but I'll let you know.

Posted by: xclr8menow

Quote:

Originally Posted by Black87LSC

I'd like to help you with that, but my father needs the brakes for his LSC (his brakes are REAL bad), and I think I'm keeping the other rear-end for a build up for my car, but I'll let you know.

Thanks for the reply. That's cool. No worries. I think I located the parts I needed from another member here.

Posted by: surfaaron

Do you still have the fog lights. I just need one. I broke the lens on one of mine.

Posted by: surfaaron

Posted by: Black87LSC

Quote:

Originally Posted by surfaaron

Do you still have the fog lights. I just need one. I broke the lens on one of mine.

Yes I have one that I will sell. The housing has surface rust on it and will have to be sanded and painted. If you want it I can paint it for you.

Posted by: surfaaron

Quote:

Originally Posted by Black87LSC

Yes I have one that I will sell. The housing has surface rust on it and will have to be sanded and painted. If you want it I can paint it for you.

I can paint it myself. All I really need is the lens any way. How much do you want for it?

Posted by: hootie26

I need the computer module that is located in the trunk by the 3rd brake light. you can call me @ 732-433-7417 Clyde Zackery or e-mail at hootie26@yahoo.com.
Thanks'
Hootie/ Clyde

Quote:

Originally Posted by Black87LSC

Hey guys, i got 2 mark vii's if anybody needs any parts. One is a Black '89 LSC (complete car) with maroon interior. This is a VERY solid car. The other one is a Light Titanium (Silver) '88 with gray interior. This car is complete minus the motor and transmission. Neither car has ever been hit. I will be keeping some parts, but most of the parts I will be selling. If anybody needs anything or has any questions, let me know.

Posted by: joker12552

Do you ahve a working moonroof motor? If so, how much shipped to 35004?

Posted by: SilverFox

Send me as many pics as you can of the cars
dan.gilsdorf@mmttechnology.com

Posted by: Black87LSC

I already stripped and junked 1 of them... 11 month delay guys?

Posted by: joker12552

Quote:

Originally Posted by Black87LSC

I already stripped and junked 1 of them... 11 month delay guys?

Sorry just joined the site and didnt notice how old this was.

Posted by: Black87LSC

I think I can hook you up with a working moonroof motor

Posted by: HHStang

MC, lines and PS pump maybe. watcha got and how much $? Please email hhstang@dwcinet.com. Thanks! Mike

Posted by: dman

Quote:

Originally Posted by Black87LSC

i am looking for a set of 16x7, 5 lug ford lacy spoke wheels. do these cars, have this kind of wheel? , searching high and low, with no luck. please reply. dman

Posted by: dman

looking for 16x7 lacy spoke alloy wheels. can anyone help? dman

Posted by: Scott Adams

I'm looking for those too. I'd especailly like the BBS (RA or RS) ones that had the center painted black to match my monochromatic paint (SE) job that were available in 1990 (mines an '89). BBS doesn't make 'em anymore...though I've sure found a bunch for the Buick GN/GNX around.
Scott

Posted by: Black87LSC

Try the boneyards..... 92+???? Crown Vic and other full-size fords had these style wheels, and they are 1" wider than the stock Mark VII BBS wheels. I would just mask the wheels and paint the centers black if needed.

Home Loan:Personal Loans:Car Insurance:Mortgages:Ringtones