(This is the forums archive - If you want to get back to the main site simply
click the banner above and you will be taken to our homepage.)
Lincoln vs Cadillac Forums is the Ultimate Online Resource for Owners and Enthusiasts of American Luxury Cars. Feel free to browse through our archive - but make sure you make it
back to our main site - Lincoln vs Cadillac Forums
Hey, gang. It was a beautiful morning here in Arizona so I decided to give my 98 LSC a bubble bath. As I was happily heading towards my local car wash, I ran into some road construction and of course got trapped in a single lane behind a nasty-a$$ foreign pick up truck which threw a chunk of gravel up onto my windshield and put a lil divot in it, thankfully withOUT cracking it.
However, once I got back into the car after washing it, I almost stopped breathing when I discovered water was dripping INSIDE the interior from the mirror down onto the gear shift!!!
QUESTION 1: On the exterior, I never really noticed the windshield trim/molding before -- on a Gen 2, is it TWO pieces that meet right in the middle of the top of the windshield, right above the mirror? Or is it only ONE piece of molding that goes all the way across the top of the windshield, and mine got cracked?
QUESTION 2: Before, I also never really paid attention to the black cowl under the windshield wipers. It looks like it's supposed to be a 2-piece construction -- right? Are the left and the right cowls supposed to butt directly together where they meet? Or should there be a lil gap of maybe 3/8" or so between them?
Thanks!
Posted by: Bates93Mark8
Hey check with your local Glass company they can most likely fill the chip and youll never notice it
Posted by: 98MarkVIIICE
Just checked my windshield. It is the same as yours. Two piece gasket meeting in the ccenter and two piece cowl with small space between. It appears that was the way it was designed.
Posted by: Frat-man-du
My 98 LSC has a two pc gasket, but looks to be a replacement. Th ecowl is 2 pc with a 1/4" gap.
